The Small Tikes Bounce ‘n Glide Rebound – Established Upward

Beneath you will discover directions on how to properly set up and place absent the Small Tikes Leap ‘n Slide Inflatable Bouncer. If you adhere to these methods you will have it up in no time.

1) 1st consider all the contents out of the box you must guarantee that all things are present.

– Blower
– 6 Stakes for Bouncer
– 4 Stakes for Blower
– The Bouncer
– Patch Package
– Carrying Bag

two) Find the area where you are going to lay out the bouncer. Guarantee that all sticks and other debris that could puncture the unit are taken off.

three) Spot the deflated bouncer on the ground and unravel it.

four) Connect the air tube to the blower and make sure it is securely tied. Also be certain to tie off the air launch gap found subsequent to the air tube.

five) Area stake the blower into the ground utilizing the stakes presented.

6). Flip the blower on. Device should get approximately one moment to inflate.

seven). As soon as the Tiny Tikes Bounce ‘n Slide Inflatable Bouncer is totally inflated stake it into the ground utilizing the 6 stakes provided.

8) Verify for leaks, if any are found use the patch package presented.

9) Allow your youngsters enjoy.

Packing up the Minor Tikes Soar ‘n Slide Inflatable jumper is also very effortless.

one) Initial change off the blower and untie the blower property. You will also have to untie the air gap positioned following to the blower hole.

Supertramp ) Fold the slide segment of the bouncer on prime of the primary bouncing location.

3) Fold the bouncer into one to 2 foot folds in the direction of the air vent.

four). After entirely folded location the bouncer in the carrying situation and store for later on.

Leave a Reply